Summer Is Here, And The Broken Bridge Aluminum Doors And Windows Remind You That Many Household Items Need To Be Carefully Maintained, Otherwise Adverse Changes Will Easily Occur In The Humid Summer, Which Will Affect The Duration Of Use. The Same Is True For The Aluminum Alloy Doors And Windows Of The Home, Which Need Good Maintenance.

1. When The Aluminum Alloy Doors And Windows Of The Broken Bridge Are In Use, The Action Should Be Light, And The Push And Pull Should Be Natural; If There Is Any Difficulty, Do Not Pull And Push Hard, And Troubleshoot First. Aluminum Alloy Doors And Windows Brand High-quality Aluminum Alloy Doors And Windows Due To High Production Costs, The Price Is About 30% Higher Than Inferior Aluminum Alloy Doors And Windows. Some Aluminum Alloy Doors And Windows Made Of Aluminum Profiles With A Wall Thickness Of Only 0.6-0.8 Mm, The Tensile Strength And Yield Strength Are Much Lower Than The Relevant National Standards, And It Is Very Unsafe To Use. Dust Accumulation And Deformation Are The Main Reasons For The Difficulty Of Pushing And Pulling Aluminum Alloy Doors And Windows Of Broken Bridges. It Is Necessary To Keep The Door Frame Clean, Especially The Cleaning Of The Sliding Groove. The Dust Accumulation In The Groove And The Top Of The Door Seal Can Be Removed With A Vacuum Cleaner.

2. When Cleaning The Aluminum Alloy Doors And Windows Of Broken Bridges, People Should Not Step On The Aluminum Frame, And Do Not Pull The Frame For Support.

3. The Aluminum Alloy Doors And Windows Of The Broken Bridge Can Be Dipped In Water Or Neutral Detergent With A Soft Cloth. Do Not Use Ordinary Soap And Washing Powder, And Do Not Use Detergents With Strong Acid And Alkali Such As Decontamination Powder And Toilet Detergent.

4. After The Rainy Day, The Wet Glass Material And Door And Window Frame Should Be Wiped Dry In Time, And Special Attention Should Be Paid To Dry The Water In The Chute. The Chute Is Used For A Long Time And The Friction Force Increases, You Can Add A Little Oil Or Apply A Layer Of Paraffin Oil.

5. The Connection Parts Of The Aluminum Alloy Frame Should Be Inspected Frequently, The Bolts Should Be Tightened In Time, And The Damaged Parts Should Be Replaced. The Vulnerable Parts Of Aluminum Alloy Doors And Windows Such As Positioning Shaft Pins, Wind Braces, And Floor Springs Should Be Checked Frequently, And Lubricating Oil Should Be Added Regularly To Keep Them Clean And Flexible.

6. The Sealing Tops And Glass Material Seals Are The Key Structures To Ensure The Sealing And Thermal Insulation Of Broken Aluminum Doors And Windows. If They Fall, They Should Be Repaired And Replaced In Time.

7. Always Check The Joint Of The Aluminum Alloy Frame And Wall. If It Is Loose Over Time, It Is Easy To Deform The Frame As A Whole, So That The Doors And Windows Cannot Be Closed And Sealed. Therefore, The Loose Screws At The Connection Should Be Tightened Immediately. If The Screw Bases Are Loose, They Should Be Sealed With Epoxy Super Glue And A Small Amount Of Cement.