|
Tips For Maintaining Aluminum Alloy Doors And WindowsWith The Increase Of Rainy Days, The Air Humidity Increases Sharply. In Such Humid Weather, If The Aluminum Alloy Doors And Windows Are Not Properly Maintained Or Cleaned, Adverse Changes Will Easily Occur, Affecting The Length Of Their Use. The Quality Of Aluminum Alloy Doors And Windows Can Be Roughly Judged From The Selection Of Raw Materials, Aluminum Surface Treatment And Internal Processing Quality, And The Price Of Aluminum Alloy Doors And Windows. Next, I Will Introduce Some Common Sense Of Maintenance Of Aluminum Alloy Doors And Windows, So As To Facilitate The Daily Maintenance Of Aluminum Alloy Doors And Windows. 1. Maintenance In Rainy Days Is Very Important On Rainy Days And The Weather Is Humid, A Dry Rag Should Be Used To Wipe The Damp Areas Of The Aluminum Alloy Doors And Windows Dry To Ensure That The Aluminum Alloy Door And Window Chutes Are Clean And Dry. After The Chute Is Used For A Long Time, The Friction Force Will Increase. You Can Use A Little Lubricant, Oil Or A Layer Of Paraffin Oil To Lubricate The Slot Of The Aluminum Alloy Door And Window To Minimize Its Friction Resistance. 2. Special Attention Should Be Paid To Daily Use In The Normal Push-pull Process, The Action Should Be Light. If It Is Found That The Push-pull Is Not Compatible, The Fault Should Be Eliminated First, And The Push-pull Should Not Be Forced To Prevent Damage. The Quality Of Aluminum Alloy Doors And Windows Can Be Roughly Judged From The Selection Of Raw Materials, The Surface Treatment And Internal Processing Quality Of Aluminum Materials, And The Price Of Aluminum Alloy Doors And Windows. When Cleaning, Be Careful Not To Step On The Aluminum Frame Or Pull Up The Frame For Support. Aluminum Alloy Doors And Windows Should Be Cleaned With A Soft Cloth Dampened With Clean Water Or Neutral Detergent. Ordinary Soap And Washing Powder Cannot Be Used, Let Alone Detergents With Strong Acid And Alkali Such As Decontamination Powder And Toilet Detergent. 3. Regular Inspection Of Key Parts The Sealing Top Strip And The Glass Material Seal Are The Key Structures To Ensure The Sealing And Thermal Insulation Of Aluminum Alloy Doors And Windows With Broken Bridges. If They Are Found To Be Falling Off, They Must Be Repaired Or Replaced In Time. The Aluminum Doors And Windows Are Tightly Closed, With Excellent Airtight And Watertight Performance, And Excellent Thermal Insulation Performance; The Window Sash Adopts The Hollow Glass Structure, Which Makes The Window Truly Display Sound Insulation, Heat Insulation, Thermal Insulation, And Excellent Functions, Saving A Lot Of Heating And Cooling Costs. At The Same Time, It Is Necessary To Frequently Inspect The Connection Parts Of The Aluminum Alloy Frame, And If The Screws Are Found To Be Loose, They Should Be Tightened Immediately. Other Parts, Such As Positioning Shaft Pins, Wind Braces, Floor Springs And Other Vulnerable Parts Of Aluminum Alloy Doors And Windows, Should Also Be Checked Frequently, And Lubricating Oil Should Be Added Regularly To Keep Them Clean And Flexible. |